Renovating

They are all the same in terms of their construction and even the working principle of a wide variety of chisel types is almost identical. After that are chisels

cutting tools , which remove with the help of hammer blows parts ofmaterials with a cutting edge . Components of tools popular in home improvement circles are:head

  • shank
  • cutting edge
  • As a rule of thumb for the correct selection of commercially available chisel types, the hardness of the cutting edge must always be higher than that of the material to be machined.

Good, if the right chisel is always at hand

The appearance makes the difference and it almost automatically explains which type of chisel is best for a particular material or purpose. And for this reason, there are not just two or three, but whole

13 different chisel types , which we now present in short form.Flat chisel

  • : The classic with a broad, narrow cutting edge; can be used for surface treatment, shearing or deburring (eg of welds);Pointed chisel
  • : Preferably used in the construction industry for particularly hard materials such as concrete; good wedge effect with high removal rate, material is broken or broken;late chisel
  • : noticeably broad, but not so acute-angled edge; serves to knock off plastered walls (large-scale use) and provides good stemming performance even with softer material (plaster or hollow brick);Mortar chisel
  • : for knocking off plaster on grouted masonry; has an octagonal shaft with a discharge channel for the cut material;Gouge
  • : with it slots and cable ducts can be pulled into soft brickwork; by the angled shaft a very accurate work with this type of chisel is possible;rammer plate
  • : actually a compressor for soil, sand or bulk material from home; is often used in road construction for plugging asphalt;Toothed iron
  • : with toothed iron, bricks or tiles can be removed from joints of old buildings without destroying them. This type of chisel is often used in the renovation of buildings;Stocker plate
  • : is used more for roughening medium-hard or porous material surfaces than for abrading; the cutting edge resembles the structure of a meat tenderizer;spade
  • : correct - also the spade as one of the most prominent garden tools belongs to the chisel types; is used in construction for excavating gravel and loamy soils;Splitting tool
  • : Use on massive rocks that have already been pre-machined with a hammer drill; belongs to the standard tools of stonemasons and sculptors;Joint chisel
  • : removing small surfaces (tiles and parts from the plaster);Tile chisel
  • : the angled shank allows an easy and safe removal of plaster between tiles;chisel
  • : originally used in woodworking, these chisel types are mainly used for restorations of wooden structures;Tips & Tricks No matter which chisel you use, use only tools with a sharp edge. The chisel head should be kept free of grease and burrs, otherwise there is a risk of injury.
Share With Friends

Leave Your Comment