Building cabinet doors yourself: how it works

Do you not like your closet doors or have broken them? Or you have made yourself a cabinet and despair at the doors? Do not panic: In this guide you will learn how to easily build a few cabinet doors yourself.

Which material for the cabinet doors?

The cheapest and easiest way is to make the door out of one piece by buying a sufficiently large piece of wood, sanding it, hinging it and attaching it to the cabinet. But there is a prettier version, which is not very elaborate and possibly even a little cheaper: Construct a door frame made of simple wooden strips and then decorate this frame. For cladding you can use chipboard, fabric or Plexiglas. We will explain below how you can build such a cabinet door with a fabric cover yourself. Sch Step by step to build cabinet doors yourself

Per door four frame timbers (two shorter, two longer)

  • Nails
  • Screws
  • Hinges
  • Sandpaper
  • Paint or paint
  • Possible connectors
  • Cloth
  • Metering measure
  • Pencil
  • Saw
  • Sanding block
  • Brush
  • Battery -Bohrer
  • Cordless screwdriver
  • Spirit level
  • Stapler
  • 1. The correct dimensions of the frame timbers

It is best to measure the size of the cabinet doors at home and have the timbers sawed into the hardware store. Measure the height of the doors. Bear in mind that the door should be flush with the outer edge of the cabinet, not the inner edge! If you are going to attach two cabinet doors, measure the entire width from one side to the other and divide the result by two. Then you have your door width for each door. Before doing so, consider whether you want to insert the transverse strips into the longitudinal strips or vice versa, ie whether the transverse strips must be slightly shorter so that the longitudinal strips can be mounted on the right and left or if the width of the transverse strips must be deducted from the length of the longitudinal strips so that you can attach them to the top and bottom of the longitudinal strips. It does not matter what you choose, that's more of a visual question.

2. Building the frame

Before you can start building the frame, you should sand the wooden strips at the sawn-off points so that you can not break any splinters. In addition, you should wear gloves when building the frame.

Depending on the width of the frame timbers, you can nail them together, screw them together directly, or screw them together using connectors. For very thick and wide frame timbers you can also use in longitudinal. and crossbar drill a hole and connect you in the desired place with some glue and a wooden dowel. Check the squareness every time you build the frame.

3. Painting the frame

If the wood is untreated, it should now be painted before covering to protect it from moisture and dirt. Allow the paint to dry well before proceeding with stringing. Bes 4. Covering the frame

Then it's time to string the frame. Lay down the frame with the side facing outwards and staple the fabric firmly tight on the inside.

Share with friends

Leave your comment