Fiber Cement Plates: Guide

Fiber cement boards have been manufactured since the end of the 19th century. Previously cement was mixed with asbestos fibers. Since the health hazard posed by asbestos fibers has been recognized, the addition of asbestos fibers is prohibited. For decades asbestos-free fiber cement boards have been produced with carbon fibers or glass fibers.

Whereas in the past only gray fiber cement boards were available, the once so unpretentious journeymen nowadays come in colorful design. They are offered in various colors, and the surface structures vary. For example, you can buy plastic-coated fiber cement boards. Fiber cement boards can be used in a wide variety of applications, indoors for wet rooms, as fire protection or partition wall constructions, outside as facade cladding, as roofing or as under-roofing. They can be used in all construction sectors and are used in new buildings as well as in renovation projects.

Fiber cement panels for facade cladding

Fiber cement panels are a cheap and popular way of permanently cladding the façade of a building. The plates are available both in large format and in the form of shingles. In any case, a substructure is to be used, because the fiber cement panels must be ventilated necessarily. Otherwise, condensation or penetrating moisture could cause great damage. A substructure can be made of wood or aluminum. When applying the fiber cement panels to the substructure, which can be done by gluing, riveting or screwing, care must be taken to ensure sufficient joint spacing, because the fiber cement panels can expand in the event of temperature fluctuations.

Supply sources for fiber cement boards

The selection of sources of supply is just as diverse as the possible uses of fiber cement boards. It is helpful to browse the Internet. On the respective sides of the manufacturers are usually an overview of the product range as well as detailed information and tips in terms of installation and function of different products. However, if you want to compare prices, you should pay close attention to the technical details, such as the thickness of the plates. Also in hardware stores and building materials dealers will find the search for fiber cement panels. A good source of supply for fiber cement panels for roof or facade cladding are roofing companies. Not infrequently, the customer can receive an attractive offer here, as the companies can pass on volume discounts to the end customer. When comparing prices you should also ask the transport costs, because a square meter weight of 15 kilos is not uncommon - even if the weight of course depends on the thickness of the plates.

Compare prices - but correct

Fiber cement boards are a relatively inexpensive and durable and easy-care material. On the other hand, depending on the application alternative, a substructure is usually required. When comparing prices, these costs must also be included. Even the pure material costs of the fiber cement panels show strong differences, which is explained by the different surface design, color and design, for example as a jewelry profile. The pure material price for the simple execution starts at 10,00 Euro per square meter. The prices for the small-scale shingles are far higher. In the cheapest version are shingles in the format 20 x 20 cm for the price of 1.18 euros plus. For example, shipping costs can be obtained from the online building materials trade at www.bausep.de, which corresponds to a price per square meter of just under € 30.00 at 25 shingles per square meter. The shingles and plates are extremely varied available, therefore, the prices also vary greatly.

Share with friends

Leave your comment