Of course, you can also paint your wall paint on the plaster instead of on a wallpaper, either directly on the smooth plaster or an overlying decorative plaster. For this you first need a stable substrate and a high-quality paint. When buying the paint, make sure it covers well and is really resistant to abrasion. St Paint the wall paint on plaster: It is important to note!
Let your walls breathe and use a diffusible color! On mineral, non-gypsum substrates, the use of a silicate paint offers, otherwise you are well served with a high-quality emulsion paint.
If you plan to paint a damp room, you will fall back on a special mildew-resistant paint that remains permanently waterproof. Paint only when the plaster is completely dry, so that it does not come afterwards damage.
instructions for brushing plaster
- covering film
- possibly deep ground
- possibly wall putty
- possibly orbital sander
- joint acrylic
- wall paint
- possibly steel putty
- possibly ceiling brush
- possibly sandpaper
- acrylic gun
- large painter roller
- small painter roller
- large Brush
- 1. Masking and covering
First, glue off all sockets, light switches, skirting boards, door and window frames. Lay foil on the floor and bring any furniture in the way to safety. Unter 2. Substrate Preparation
If the plaster is sanding or heavily absorbent, first coat it with primer, using a ceiling brush. After drying, you can fill in any holes and carefully grind the spots and then remove dust. In the end, it is often possible to prime again.
3. Ciping joints with acrylic
Now use the acrylic to spray all connection joints around the wall along the adhesive tape. The tape should be a few millimeters away from the plaster for this purpose.
4. Paint wall paint on plaster
Now stroke your plaster with the wall paint, first the edge areas with brush and small roll, then the surface wet-in-wet with the large painting roller. After drying, you can repeat the process again if necessary.