Lime paint is one of the traditional paints used by our ancestors thousands of years ago. Even today, many people still appreciate the properties of this special material, which thanks to its high pH value effectively protects against mold while remaining breathable and contributing to a healthy indoor climate. But how do you properly apply lime paint?
The different types of lime paint
Previously, there were only two types of lime paint: the quicklime and the lime lime. Extinguishing lime was simply made by so-called "lime slaking" by mixing calcium oxide with water. This leads to a strong heat development.
The preparation of lime lime, however, extends over a longer period, here, the lime is "squeezed" over a longer period in water. During this often months-long phase, contaminants settle and the internal structure of the paint changes.
Lime lime is considered as pure, abrasion-resistant and overall more quality than slaked lime. In the meantime, however, many other variants of the lime paint have been developed, enriched with binders and pigments, each of them has special properties.
Roll, brush or brush: How do I bring my lime paint on the wall?
Lime colors often have a comparatively thin consistency; they are applied one above the other in several layers. Here it makes sense to paint as well as in the old days with the brush, this is enough for a normal painter's quota.
The color is incorporated with the quast, so that a continuous, but loose coating is created, without unsightly approaches. However, the question of whether to paint or roll lime paint is given a whole new explosiveness due to the advent of modern color grades:
So-called "fat" lime colors, recognizable by the creamy consistency, can generally also be applied with the roll. You will usually find the corresponding instructions on the corresponding container. St Paint or roll lime paint: You should pay attention!
It does not matter if you paint or roll your lime paint: To handle this special paint professionally, you should observe the following rules. Pre-wet strong absorbent surfaces
Primer with diluted lime (casein) paint
- Do not process limescale below 8 degrees Celsius
- Paints will work better in high humidity
- Protect adjacent components with adhesive tape and foil
- Quickly remove lime splashes, protect eyes and skin
- Several thin layers Apply
- Keep paint slightly damp by spraying (increases abrasion resistance) über Coat only completely dried layers
- Tips & Tricks Remember that lime paint often appears transparent when wet. The actual opacity can only be assessed after complete drying.