To seal the parquet floor is the best way to obtain a durable floor covering resistant to dirt and damage. How to proceed professionally correct step by step, read here.
Sealing - the most durable way to protect the parquet floor
Only those who today can not make friends with the appearance of a sealed floor should resort to oiling or waxing. Sealing is clearly the toughest and most durable surface treatment that will make your parquet flooring really resilient for many years to come. In addition, only sealed floors can be wiped properly damp.
The parquet floor is sealed with a special sealing varnish, which must be applied in two, or better three, layers. About two weeks after applying the last coat of soil is then fully resilient and also resists household cleaners.
Step by step to the parquet floor
- Sealing varnish
- Floor grinder
- Small sanding machine for corners and edges
- Roller for applying the sealing varnish
- possibly additional light source
1. Sanding the floor
Correct sanding of the floor with the sanding machine is all around , Only when properly sanded, the seal can also hold properly and the floor also gets a really nice look.
Floorboards should always be sanded parallel to the board, cube parquet diagonally to the individual cubes and rod parquet at an angle of approximately 7 - 15 degrees to the laying direction. Then make the floor completely dust-free with the vacuum cleaner. Be very careful. Kanten 2. Edges, corners and fine sanding
After pre-sanding, the fine sanding - and the machining of corners and edges, also as coarse and fine sanding. It is best to repair joints and cracks with joint solution and sanding dust between coarse and fine sanding.
3. Applying the sealing varnish
When applying, ensure that strokes are as uniform as possible. Work on a 1.5 meter wide area at once - that makes a better picture in the end.
After the first application, intermediate finishing is often helpful. Then clean the floor again very carefully and make it completely dust-free again.
4. Second and third shifts
After each additional day, you can then apply the second and third shifts. In the meantime, protect the floor from direct sunlight.
Tips & TricksWhen applying the seal, always work away from the existing light source to detect irregularities faster and work cleaner.